Aquadrive Antivibration Systems

Isolation of the engine from the hull structure. Cabin & cockpit noise and vibration are greatly reduced by 50% or more.

CVB05.10 Aquadrive Moduline

B10

Custom-length CV 05 driveshaft is available in lengths from 150 mm (from 240 mm with tubeshaft design). Maximum length depends on shaft rpm.

More Information
CVB10.10 Aquadrive Moduline

B10

Custom-length CV 10 driveshaft is available in lengths from 150 mm (from 240 mm with tubeshaft design). Maximum length depends on shaft rpm.

More Information
CVB15.10 Aquadrive Moduline

B10

Custom-length CV 15 driveshaft is available in lengths from 170mm (from 270mm with tubeshaft design). Maximum length depends on shaft rpm

More Information
CVB21.10 Aquadrive Moduline

B10

Custom-length CV 21 driveshaft is available in lengths from 210mm (from 280mm with tubeshaft design). Maximum length depends on shaft rpm.

More Information
CVB21.20 Aquadrive Moduline

B20

Custom-length CV 21 driveshaft is available in lengths from 210mm (from 280mm with tubeshaft design). Maximum length depends on shaft rpm.

More Information
CVB30.20 Aquadrive Moduline

B20

Custom-length CV 30 driveshaft is available in lengths from 245mm (from 340mm with tubeshaft design). Maximum length depends on shaft rpm.

More Information

HDL60.700 Aquadrive Heavy Duty

Custom-length CV 60 driveshaft is available in lengths from 370mm (from 700mm with tubeshaft design). Maximum length depends on shaft rpm.

More Information

CVB32.30 Aquadrive Moduline

B30

Custom-length CV 32 driveshaft is available in lengths from 300mm (from 420mm with tubeshaft design). Maximum length depends on shaft rpm.

More Information
CVB42.30 Aquadrive Moduline

B30

Custom-length CV 42 driveshaft is available in lengths from 270mm (from 430mm with tubeshaft design). Maximum length depends on shaft rpm.

More Information
CVB 42.680 Aquadrive Heavy Duty HDL

Custom-length CV 42 driveshaft is available in lengths from 270mm (from 430mm with tubeshaft design). Maximum length depends on shaft rpm.

More Information
HDL48.690 Aquadrive Heavy Duty

Flanged Option Available

Custom-length CV 48 driveshaft is available in lengths from 320mm (from 420mm with tubeshaft design). Maximum length depends on shaft rpm.

More Information
CVB 42.680 Aquadrive Heavy Duty HDL

Flanged

Custom-length CV 42 driveshaft is available in lengths from 270mm (from 430mm with tubeshaft design). Maximum length depends on shaft rpm.

More Information
HDL60.700 Aquadrive Heavy Duty HT

High Tensile Steel

Custom-length CV 60 driveshaft is available in lengths from 370mm (from 700mm with tubeshaft design). Maximum length depends on shaft rpm.

More Information

HDL60.780 Aquadrive Heavy Duty

Custom-length CV 60 driveshaft is available in lengths from 370mm (from 700mm with tubeshaft design). Maximum length depends on shaft rpm.

More Information

Aquadrive System Engine Mounts

It is essential to select the correct rubber grade and mount for the engine or generator in question. For reference, the chart above shows the level of deflection (or squash) that will occur on each model of mount for a given loading.

In general you should aim for 3mm on the 50210, 4mm on the 50220, 5mm on the 50230 and 6mm on the 50240. The numbering system is simple: A 50223 mount is the 50220 model with number three rubber hardness and so on. Some engines, particularly those with less than four cylinders, require particular care and your distributor will help with these.