WAVESTREAM RANGE
|
Wavestream Micro System Designed for the bilges of day boats, RIBs and small sports boats or where minimal space is available, the Micro unit is easy to connect into the bilge water system, using ¾” BSP connections. The unit takes a space only 190mm high by 120mm diameter. Filter cartridges can be replaced in seconds.
• Wavestream Micro • Flow rate 1 – 40 litres/minute • Max. pressure 10 bar • Max. temperature 40 deg. C. • Min. temperature 1 deg. C. • Connections 3/4” BSP • Cartridge WS-CM
|

|
 |
Wavestream 1000 System The 1000 system has a larger filter element to cope with the demands of larger pleasure boats up to 20m. 3/4” BSP connections are used, and the flow rate, at 40 litres, is the same as the Micro system but filter cartridge replacement intervals double. The 1000 system carries Type Approval from Lloyds Register of Shipping.
• Wavestream 1000 • Flow rate 1 – 40 litres/minute • Max. pressure 8 bar • Max. temperature 40 deg. C. • Min. temperature 1 deg. C.Connections 3/4” BSP • Cartridge WS-C1
|

|
 |
Wavestream 2000 System Recommended for large pleasure craft and commercial boats, the 2000 system will handle bilge pump flow rates up to 265 litres per minute with a 117mm diameter filter cartridge and 1 1/2” BSP connections.
• Wavestream 2000 • Flow rate 1 – 265 litres/minute • Max. pressure 6.8 bar • Max. temperature 37 deg. C.Min. temperature 1 deg. C. • Connections 11/2” BSP • Cartridge WS-C2
|

|
 |
Wavestream 3000 System The 3000 is designed for large commercial craft and ships. It incorporates a massive filter cartridge almost 500mm long, with significantly increased capacity. The flow rate and BSP connectors are common with the 2000 series.
• Wavestream 3000 • Flow rate 1 – 265 litres/minute • Max. pressure 6.2 bar • Max. temperature 37 deg. C. • Min. temperature 1 deg. C. • Connections 11/2” BSP • Cartridge WS-C3
|

|
 |
Wavestream Stainless Steel System These multi-cartridge systems were born in the oil industry but can be used for even larger vessels than the 3000 system. Each unit is produced to meet a defined need. Details of the flow rates are needed to specify.
Wavestream Stainless Steel specification and dimensions vary as each unit is custom built.
|

|