AQUADRIVE ENGINE MOUNTS

Complementing the Aquadrive's flexibility

The Aquadrive system creates free movement between the engine and the shaft. One result is that the engine’s mountings can be much softer than normal, partly because the engine can vibrate freely relative to the shaft, and partly because no propeller thrust reaches the mounts and strains them forwards.

Aquadrive engine mounts are used with engines of four cylinders or more, and our expert staff will rapidly select the correct rubber stiffness for the machinery involved.

What makes a mount good – and safe?

• Only natural rubber is used. Each size of mount is manufactured with up to four different rubber stiffness grades.
• The steel hood covers the whole top of the mount, reducing the risk of diesel attacking the natural rubber.
• The mount is “fully captive”. Even if the engine turns over and the rubber elements rip, the engine is held tight.
• The bolt holes are slotted one way at each end so you can adjust their position.

50210 mounts

The baby of the range. 38mm high with a 12mm stud. Four rubber grades are available for weights up to 60kgs.

50220 mounts

The most versatile mount ever, taking weights up to 200kgs or more and available with five different rubber grades. The mount is 50mm high, with a 16mm stud.

50230 mounts

The big one. 68mm high with a 20mm stud, the 50230 comes in three rubber grades and will take weights up to 700kgs.

50240 mounts

The Giant. 110mm high and secured with four bolts, the 50240 has a 24mm stud and comes in four rubber grades taking up to almost 3000kgs.

Trademarks
Moduline and Aquadrive are registered trade marks.